Australian/New Zealand Luthiers Forum

Thanks Alan, the guy i built it for loves it, he says it's way louder than his other acoustics, so it's great for him and very satisfying for me as the builder. Wayne

Thanks for that Nick, much appreciated. Wayne

Here's a link for anyone who wants a listen. Wayne


http://www.youtube.com/watch?v=urYEJ_OW ... e=youtu.be

Love the headstock and bridge, they look great as does the whole guitar. Wayne

Thanks for the comments guys, coco is hard to glue and prone to cracking but it does look and sound nice. Yes Mark that's my design and it does have big voice. Wayne

That might be worth a try thanks Steve. Regards Wayne
I don't think it's twisted that bad Marcus (ha ha good one) Wayne

Almost 6 months in time and a lot of headaches but it's all done now. Wayne

I have a Walnut guitar that i built about 6 months ago, turned out real nice, played beautiful and had a fantastic tone. Anyway i'm not sure why or how but the guitar developed a bad case of fret buzz, when i look down the neck i can see it's warped. I tried a refret but that didn't work so i'm thin...

Hi Craig, yes i pin the neck with 2 tapered pins 1 from each side, the holes are reamed with a tapered reamer and pins are made to suit, works well, also makes it a bit easier to remove neck if need be. Wayne

It is slightly smaller than a dread, the timber is also called Carribean r/wood but it's not a true r/wood ( metopeum brownei ) it's non porous so no grain filling which to me is great because i fp all my guitars so this one will be a lot easier. I haven't used it before but the tone is supposed to ...

Tod i hope to have a video of the guitar being played, which i'll put on youtube and then leave a link, i have 3 of my guitars on youtube, it helps when trying to sell them. Wayne

This is my 6th guitar but 1st cutaway. Had some headaches bending the cutaway, couldn't pull it into my mould so had to finish it on a hot pipe. It has Che Chen b/s, Sitka top, indian r/w fretboard bindings and endgraft. Walnut neck and bridge. Be a couple of months till it's finished, hard to get g...

I used Adirondack spruce for the soundboard and Koa for bindings and end graft. I used Ebony for fretboard and bridge. I installed the tuners, nut and saddle today, strung it up all seems good got a nice tone to it. Just needs to be unstrung so i can polish the nut and saddle, steel wool and oil the...

I'm building a cocobolo guitar for a guy in Q/land. Had nothing but trouble all the way along. 1st set of coco split. Got another set from RC tonewoods, much nicer and no splits like the set my customer supplied. Gluing is a real pain i've had to reglue several joints because of the oil in the timbe...

http://www.best-eurospruce.com/resource ... -00_en.pdf
Here's some plans i found on the net not sure if they have already been posted. Wayne