Search found 1608 matches
- Wed Aug 22, 2012 6:07 pm
- Forum: Instrument Builders Forum
- Topic: 7 String Falcate Flamenco
- Replies: 24
- Views: 17572
- Tue Aug 21, 2012 2:11 pm
- Forum: Instrument Builders Forum
- Topic: 3 piece tops
- Replies: 16
- Views: 16684
Re: 3 piece tops
Here's another one; five piece top, four piece back. No need to worry about the number of pieces!
- Thu Aug 16, 2012 8:29 pm
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: Intonation and Hand position
- Replies: 4
- Views: 5435
Re: Intonation and Hand position
I just had a close look at this on a classical guitar with the T(1,1) at 100Hz and the T(1,1)2 at 191Hz. The guitar was perfectly tuned on the open strings and played G in tune (according to my Korg CA-1 chromatic tuner) when I plucked the G (3rd fret 6th string) in a fairly normal position. I moved...
- Sun Aug 12, 2012 10:56 pm
- Forum: Instrument Builders Forum
- Topic: Falcate braced classical
- Replies: 136
- Views: 87388
Re: Falcate braced classical
That's what the small diagonal tertiary brace in the lower bout is for...and is currently missing from your design. A couple of diagonal grained diamond cleats will do the job if you don't fancy a brace there.
- Sun Aug 12, 2012 11:49 am
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: resonant frequencies no where to go
- Replies: 4
- Views: 6684
Re: resonant frequencies no where to go
Pretty much what Luke said. Try to keep the bridge mass lower. It's possible to get down to 14grm for the bridge (no pins/saddle). Finish the build, and if you find a problem you can hear with the main air resonance consider enlarging the soundhole, but you can always come back and seek more advice ...
- Thu Aug 09, 2012 9:10 am
- Forum: The Gallery
- Topic: GA model in Rosewood/Cedar
- Replies: 11
- Views: 12731
- Wed Aug 08, 2012 10:35 pm
- Forum: The Gallery
- Topic: GA model in Rosewood/Cedar
- Replies: 11
- Views: 12731
Re: GA model in Rosewood/Cedar
Nice guitar, Rod, and nice sound. How did you do the recordings?
- Wed Aug 08, 2012 5:46 pm
- Forum: Instrument Builders Forum
- Topic: Falcate braced classical
- Replies: 136
- Views: 87388
Re: Falcate braced classical
I bevel them down to the thickness of the back linings. Various pics in Chapter 12.Tod Gilding wrote:Not sure what Trevor does with the mass blocks...
- Mon Aug 06, 2012 8:28 pm
- Forum: Jigs & Fixtures
- Topic: Gotta lotta bottle...
- Replies: 6
- Views: 11142
Gotta lotta bottle...
Not sure where to put this one, but I'm sure one of our friendly, helpful mods will fix things if this isn't in the right place... I'm sure the vast majority of you will have seen one of these: Titebond.jpg But what does it have in common with one of these? Ketchup.jpg Well, the tops are the same si...
- Sat Aug 04, 2012 11:38 am
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: Compensating?
- Replies: 3
- Views: 5619
Re: Compensating?
Possibly! The compensation techniques I use focus on getting the fundamentals of each note to play in tune. However, string partials always play sharp with respect to the fundamental to some degree (on steel strings generally not much), so stretch tuning (which is what Taylor is doing) is not a bad ...
- Sat Aug 04, 2012 11:13 am
- Forum: Instrument Builders Forum
- Topic: bridge & fretboard finishing
- Replies: 33
- Views: 27974
Re: bridge & fretboard finishing
If you're contemplating a finish on a bridge, check this out: click
- Thu Aug 02, 2012 10:33 pm
- Forum: Instrument Builders Forum
- Topic: Falcate braced classical
- Replies: 136
- Views: 87388
Re: Falcate braced classical
Martin,
Not sure whether you've just not got round to it yet, but filling the gap between the neck block and the UTB is always a good idea.
Not sure whether you've just not got round to it yet, but filling the gap between the neck block and the UTB is always a good idea.
- Tue Jul 31, 2012 8:03 pm
- Forum: Instrument Builders Forum
- Topic: Gibson Kasha disaster
- Replies: 12
- Views: 10619
Re: Gibson Kasha disaster
Assuming nothing has actually let go on the inside.... ...you could try one of those bridge doctor thingies, and jack the top more-or-less straight (over a few weeks). Given that the sound couldn't get much worse (no sound!), it's not a big risk or a big expense. The neck twist is another matter. It...
- Tue Jul 31, 2012 9:36 am
- Forum: Instrument Builders Forum
- Topic: Seperate PU-glued joint with heat, solvent or saw?
- Replies: 19
- Views: 12677
Re: Seperate PU-glued joint with heat, solvent or saw?
Funny (as in strange). I've just had a PU joint fail in a non-guitar related project. It's not like I don't know how to make a joint! I thought this stuff was supposed to be idiot proof! I did some rough-and-ready testing (butt jointing 18mm ply) and disassembly with a mallet. I'm back to using Tite...
- Sun Jul 29, 2012 11:34 pm
- Forum: Tutorials
- Topic: Intalling K&K piezo pads
- Replies: 6
- Views: 12247
Intalling K&K piezo pads
I've come across a number of people who haven't been overly impressed with the factory instructions on how to install the K&K mini piezo pad pick-ups; the classical instructions call for drilling holes in the saddle slot, or measuring the distance from the soundhole using the lead and then taping it...
- Sun Jul 29, 2012 10:34 am
- Forum: Instrument Builders Forum
- Topic: Angle SIdes - 15" Back on Weissendborn
- Replies: 8
- Views: 9595
Re: Angle SIdes - 15" Back on Weissendborn
A dome is a dome is dome. Which is the great thing about domes. So as I see it (I hope I'm understanding this) you have two options: 1) Dome the rims over their whole length (butt to headstock) with the high point of the dome towards the top of the upper bout. This will, of course, narrow the depth ...
- Fri Jul 27, 2012 6:39 pm
- Forum: The Gallery
- Topic: Rare Encounter
- Replies: 7
- Views: 9728
Re: Rare Encounter
Thanks for all the kind comments! Are they going to the same owner? shame to break up a family. Perhaps a bit more background... I got an email from a player who was interested in a cedar/rosewood steel string, so I called him up. He was about to head off to the USA, but was quite local, so he dropp...
- Thu Jul 26, 2012 12:27 am
- Forum: The Gallery
- Topic: Rare Encounter
- Replies: 7
- Views: 9728
Rare Encounter
In best David Attenborough voice: Rarely seen alone in the wild and even more rarely seen together as a mating couple, these two fantastic specimens were caught on film during their courtship routine. You can appreciate their gleaming coats, beautiful markings and their fine pedigree; absolutely sup...
- Wed Jul 25, 2012 10:04 pm
- Forum: Instrument Builders Forum
- Topic: Pore filling
- Replies: 20
- Views: 17297
Re: Pore filling
I don't really want to hijack this thread but...I will anyway... I was gluing up some non-guitar related stuff with PU glue and was cleaning up the fizz whilst it was still wet. I spread it around a bit with a paper towel dampened with acetone. When I came back, I had a nice pore fill and no fizz. A...
- Fri Jul 20, 2012 5:08 pm
- Forum: Instrument Builders Forum
- Topic: In the market for a bending Iron.
- Replies: 22
- Views: 19558
Re: In the market for a bending Iron.
I've been using a piece of aluminium yacht mast with a 150mm long, 500w tungsten halogen linear lamp in it, the type used in work site flood lights. Temperature control is via a domestic dimmer switch. The mast section is sealed both ends. The same globe has been going strong for ~10 years now. I go...
- Wed Jul 18, 2012 6:38 pm
- Forum: The Gallery
- Topic: Eight - string guitar
- Replies: 13
- Views: 12206
- Sun Jul 15, 2012 5:25 pm
- Forum: Instrument Builders Forum
- Topic: Neck Joint Rant
- Replies: 12
- Views: 9907
Re: Neck Joint Rant
Aw, Jeff...call that a rant?
Come on, tell us what you really think!
Come on, tell us what you really think!
- Sun Jul 15, 2012 5:19 pm
- Forum: Instrument Builders Forum
- Topic: Acoustic Pickup Advice... Again.
- Replies: 8
- Views: 7373
Re: Acoustic Pickup Advice... Again.
Or does anyone have first hand experience with the B-Band AST 1470 for example? A lot of Ashton guitars have B-Band pick-ups in, though they might have them re-badged. Check out the local cheap guitar shop. I thought they sounded pretty good, considering. The B-Band pick-up is based on electret con...
- Sun Jul 15, 2012 5:09 pm
- Forum: Instrument Builders Forum
- Topic: Gore/Gilet/ Concepts & Falcate Bracing in a Uke Build
- Replies: 80
- Views: 85880
Re: Gore/Gilet/ Concepts & Falcate Bracing in a Uke Build
It may be that, after only 1 week, the uke hasn't opened up itself yet. Can that still happen with CF sandwiched braces or does it eliminate the possibility? Any experience with this Trevor? The sound of guitars tends to change a bit over the first two weeks or so. After that, the tonality doesn't ...
- Thu Jul 12, 2012 11:35 pm
- Forum: The Gallery
- Topic: First clone - that I know of!
- Replies: 5
- Views: 8098
First clone - that I know of!
Just when you thought it was safe to return to the shed, along comes a young guy who makes you stop...and think... What was I doing when I was 19? I was lucky enough not to have a war to fight, other than on playing fields, and I didn't build my first boat until I was 21. Amazing what you can do bef...