Search found 185 matches
- Thu Nov 11, 2010 2:42 pm
- Forum: Jigs & Fixtures
- Topic: A cyclone dust extractor when you don't have the money!
- Replies: 16
- Views: 20947
Re: A cyclone dust extractor when you don't have the money!
Well I tested the cyclone under load and put two thirds of a bucket of thicknessor and sander material through. With the suction hose (4") placed in the bucket the material was drawn up in about 10 - 15 seconds. Only about 1/4 of a hand full/desert spoon ended up on the baffle in the second stage of...
- Thu Nov 11, 2010 2:42 pm
- Forum: Jigs & Fixtures
- Topic: A cyclone dust extractor when you don't have the money!
- Replies: 16
- Views: 20947
Re: A cyclone dust extractor when you don't have the money!
Much better thank you Lillian! I have included a drawing of the central tube which I installed but forgot to take an image of. The 150mm/6" tube extends down to about the same level as the metal cyclone section.
regards
Tim
regards
Tim
- Thu Nov 11, 2010 2:35 pm
- Forum: Jigs & Fixtures
- Topic: A cyclone dust extractor when you don't have the money!
- Replies: 16
- Views: 20947
A cyclone dust extractor when you don't have the money!
You are viewing a re-constructed thread by the ANZLF recovery team. For more information click here . " Originally Posted on:"Fri Apr 09, 2010 " Having stopped falling off my bike and smashing body parts and decided a trip to hospital in an ambulance for a cardiac condition was interesting but neve...
- Thu Nov 11, 2010 3:31 am
- Forum: Instrument Builders Forum
- Topic: Anything interesting happen in your shed?
- Replies: 9
- Views: 8646
Re: Anything interesting happen in your shed?
Posted: Sun Jun 06, 2010 11:20 pm Post subject:
I might be able to offer some sanguine Bloodwood Satine!
_________________
http://www.australiantonewoods.com
This is the final re-constructed message of this topic posted by the ANZLF help team.
I might be able to offer some sanguine Bloodwood Satine!
_________________
http://www.australiantonewoods.com
This is the final re-constructed message of this topic posted by the ANZLF help team.
- Thu Nov 11, 2010 3:28 am
- Forum: Instrument Builders Forum
- Topic: Anything interesting happen in your shed?
- Replies: 9
- Views: 8646
Re: Anything interesting happen in your shed?
Posted: Sun Jun 06, 2010 11:10 am Post subject:
Nic,
I am quite glad too. It doesn't bear thinking about!
regards
Tim
_________________
http://www.australiantonewoods.com
Nic,
I am quite glad too. It doesn't bear thinking about!
regards
Tim
_________________
http://www.australiantonewoods.com
- Thu Nov 11, 2010 3:17 am
- Forum: Instrument Builders Forum
- Topic: Anything interesting happen in your shed?
- Replies: 9
- Views: 8646
Anything interesting happen in your shed?
You are viewing a re-constructed thread by the ANZLF recovery team. For more information click here . Originally Posted on: Sat Jun 05, 2010 3:24 pm Inattention can cause major injury. Fortunately this will only dent my pride and disfigure my finger nail (hopefully!) Hand to close to blade after cu...
- Wed Nov 10, 2010 1:53 am
- Forum: The Gallery
- Topic: Archie's No4
- Replies: 12
- Views: 14069
- Mon Nov 08, 2010 4:20 pm
- Forum: Instrument Builders Forum
- Topic: bindings for soprano
- Replies: 14
- Views: 13968
Re: bindings for soprano
Good point Craig. I thought I would be able to avoid hot spots with the controller unit which monitors the temperature through a thermocouple in the blanket.
regards
Tim
regards
Tim
- Mon Nov 08, 2010 4:14 pm
- Forum: Instrument Builders Forum
- Topic: bindings for soprano
- Replies: 14
- Views: 13968
Re: bindings for soprano
I had a go with material from the same batch that I sent Andrew and had success. I did however use a thermal blanket over a former and had 135 celcius as my target. I also use a backing steel strap when I bent the Pacific Blackwood. Tas Blackwood bent okay but could have been done with the steel str...
- Mon Nov 08, 2010 10:54 am
- Forum: Instrument Builders Forum
- Topic: Name this wood.....Tim
- Replies: 15
- Views: 10913
Re: Name this wood.....Tim
I missed that one. I was at the Wood show in Perth trying to educate the masses.
regards
Tim
regards
Tim
- Sun Nov 07, 2010 1:18 pm
- Forum: Instrument Builders Forum
- Topic: Take two, Khaya senegalensis
- Replies: 49
- Views: 38160
Re: Take two, Khaya senegalensis
Hi Jim, Just got back from my drive down south! As an after thought if you have the facility to resaw into sets that would be the best approach. This would eliminate 90% of the surface checking. Possibly have 8 - 10mm thick rack sticks at about 50 - 75mm spacing with a sacrificial top cover and dead...
- Sun Nov 07, 2010 12:28 pm
- Forum: Instrument Builders Forum
- Topic: Take two, Khaya senegalensis
- Replies: 49
- Views: 38160
Re: Take two, Khaya senegalensis
Hi Jim, I thought I might add a few thoughts to this discussion that might be of some help. The way you breakdown the log will have some effect on the way the recovered boards react to a range of tensions that may exist in the log prior to milling. Namely spiral twist in the log, heart shakes, knots...
- Sun Nov 07, 2010 1:21 am
- Forum: Instrument Builders Forum
- Topic: Fretboard wood
- Replies: 2
- Views: 3446
Re: Fretboard wood
Hi Aidan,
Gimlet should be quite suitable. Curly Wandoo has also been used for fretboards.
regards
Tim
Gimlet should be quite suitable. Curly Wandoo has also been used for fretboards.
regards
Tim
- Thu Nov 04, 2010 3:34 pm
- Forum: Instrument Builders Forum
- Topic: Sidebending machine steel 'slats' -where do you get it?
- Replies: 20
- Views: 20522
- Thu Nov 04, 2010 3:31 pm
- Forum: Instrument Builders Forum
- Topic: Sidebending machine steel 'slats' -where do you get it?
- Replies: 20
- Views: 20522
Re: Sidebending machine steel 'slats' -where do you get it?
Unrolling fee!!!! Thats what I thought. I think it is the fee they charge when they can't be bothered unrolling the sprung material and have run low on beer!
- Thu Nov 04, 2010 3:28 pm
- Forum: Instrument Builders Forum
- Topic: Sidebending machine steel 'slats' -where do you get it?
- Replies: 20
- Views: 20522
Re: Sidebending machine steel 'slats' -where do you get it?
I sourced my .012"/0.3mm shim stainless spring steel from http://www.boynessprings.com.au/ (Perth). They sell the material in 300mm wide rolls at about $80 per metre. They have an unrolling fee included in the price. Let me know if you need any assistance.
regards
Tim
regards
Tim
- Thu Oct 28, 2010 11:10 pm
- Forum: Instrument Builders Forum
- Topic: Another "what is this wood"
- Replies: 35
- Views: 27360
Re: Another "what is this wood"
Here is a web image of Padauk. Doesn't have any scale reference.
Pterocarpus soyauxii
Pterocarpus soyauxii
- Thu Oct 28, 2010 10:06 pm
- Forum: Instrument Builders Forum
- Topic: Another "what is this wood"
- Replies: 35
- Views: 27360
- Thu Oct 28, 2010 7:07 pm
- Forum: Instrument Builders Forum
- Topic: Another "what is this wood"
- Replies: 35
- Views: 27360
Re: Another "what is this wood"
Jeez! A man gets cut down for making a stab in the dark! I will have some NG Rosewood arriving in a few days so I can make a comparison. That being said, the absense of leaf and flower might demand a bit of DNA work. Any botanists handy!
- Thu Oct 28, 2010 6:17 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
- Thu Oct 28, 2010 6:15 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
Re: What wood is this?
Matthew ... genius! Yes, it's grevilia striata http://en.wikipedia.org/wiki/Grevillea_striata
- Thu Oct 28, 2010 6:12 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
Re: What wood is this?
You're so close, Kim ... think bovine, cow, steak, etc, etc ... crikey, I'm practically telling you what it is .
- Thu Oct 28, 2010 6:10 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
- Thu Oct 28, 2010 6:06 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
- Thu Oct 28, 2010 5:38 pm
- Forum: Instrument Builders Forum
- Topic: What wood is this?
- Replies: 21
- Views: 16833
What wood is this?
You are viewing a re-constructed thread by the ANZLF helping team. For more information click here.
Originally Posted: Sun Sep 26, 2010 8:04 pm
This is an easy one so no clues!
Originally Posted: Sun Sep 26, 2010 8:04 pm
This is an easy one so no clues!