Search found 96 matches
- Fri Apr 05, 2013 6:35 am
- Forum: Instrument Builders Forum
- Topic: Martin conversion
- Replies: 0
- Views: 4273
Martin conversion
As many of you may know I often convert old guitars that need major work. Here is the latest one I did on commission . This is rebuilt to 1937 specs. The guitar received a new top and neck. All bracing is located to pre war positions. The braces shaped as prewar with tucked braces and assembled with...
- Fri Mar 29, 2013 3:19 am
- Forum: Instrument Builders Forum
- Topic: 24" Sanding Discs
- Replies: 22
- Views: 19690
Re: 24" Sanding Discs
While I may sell this in the states here is a helpful hint If you can find wide belts for a thickness sander , you can cut the belt and make your own disk. A fresh utility blade cuts this well from the back.
60 or 80 grit works the best
60 or 80 grit works the best
- Mon Mar 04, 2013 12:41 am
- Forum: Anything Goes
- Topic: Ethical use of materials
- Replies: 23
- Views: 15823
Re: Ethical use of materials
In the USA it is ILLEGAL to reuse Ivory .There is a big difference between BWR and IVORY . Ivory comes from a living animal so this and tortoise are treated differently . I agree that it seems like a senseless law but it is there to protect the surviving animals. Besides there are better materials t...
- Mon Mar 04, 2013 12:35 am
- Forum: Jigs & Fixtures
- Topic: Bridge clamp
- Replies: 13
- Views: 19535
Re: Bridge clamp
That is actually an old and true design , but to make it even better, you use 3/8 heavy silicone padding under the bridge area , then you can get toggle pads at most home depots or lowes , the toggle pads are great for working the wings. Also you may want to make a inner cawl so you don't over stres...
- Mon Mar 04, 2013 12:32 am
- Forum: Instrument Builders Forum
- Topic: Binding tape ruining my top
- Replies: 20
- Views: 18468
Re: Binding tape ruining my top
One of the best tapes I found was 3M 233. It is a stretchy tape. Also no matter what tape you use , if you don't seal the top then start in the area under the fretboard and you can read the fiber direction. Then pull the tape off in that direction and you will be fine.
- Tue Feb 12, 2013 3:52 am
- Forum: Instrument Builders Forum
- Topic: Scale length - does it really affect sound?
- Replies: 15
- Views: 16570
Re: Scale length - does it really affect sound?
Yes scale length will indeed influence the voice of the guitar. Capoing won't simulate that change really. The difference is that a longer scale will need more tension to tune to pitch. This allows more energy to be converted to work. It is all about Physics. I like longer scales for lead picking an...
- Mon Jan 21, 2013 9:53 am
- Forum: The Gallery
- Topic: #152 out the door
- Replies: 8
- Views: 9400
#152 out the door
This is my 152 guitar. I swapped this for an organ that my Grandmother played in church. Maple , pre war spec hot hide glue and surprising how bassey this maple sounds. Red spruce top. A touch of toner in the nitro to pop the grain.
- Sat Jan 19, 2013 4:12 am
- Forum: Instrument Builders Forum
- Topic: 1975 Martin D28
- Replies: 4
- Views: 5821
Re: 1975 Martin D28
Often , if a neck reset was done the frets #14-15-16 tend to get pushed up a bit from the steam 15 being removed then replaced. I don't know about you but I seldom play that far up. If you have to redo those frets it isn't a big deal at all.
- Sat Jan 05, 2013 11:41 am
- Forum: Instrument Builders Forum
- Topic: Passing on the addiction
- Replies: 12
- Views: 12707
Re: Passing on the addiction
Anything that allows you to share your time and knowledge with your children is more than a guitar , it is about a heritage. Enjoy the time together , it will be gone faster than you know. Cherish this time of sharing.
- Mon Dec 31, 2012 10:52 am
- Forum: Instrument Builders Forum
- Topic: Are Guitarists getting smarter?
- Replies: 47
- Views: 37673
Re: Are Guitarists getting smarter?
I have been building for 14 years and I now have a back log on orders. I think the buyers are more particular and are finding the production made instruments to sterile . Quality of tone is now replaced with warranty issues and cost of production. We as builders still like to make what we make the w...
- Sat Dec 29, 2012 1:51 am
- Forum: Instrument Builders Forum
- Topic: Fret leveling question
- Replies: 22
- Views: 19648
Re: Fret leveling question
OK so you want to compare cats LOL this is one of the most spoiled cats in the world and my wife and I are his servants and staff .
Yes Yoda cat is a great looking cat.
https://www.facebook.com/media/set/?set ... 519&type=1
Yes Yoda cat is a great looking cat.
https://www.facebook.com/media/set/?set ... 519&type=1
- Fri Dec 28, 2012 1:57 pm
- Forum: Instrument Builders Forum
- Topic: Fret leveling question
- Replies: 22
- Views: 19648
Re: Fret leveling question
I have a neck jig , In electrics I find it more useful than acoustics but it is an overkill jig and one I would not buy again or recommend.
- Thu Dec 27, 2012 1:00 am
- Forum: Instrument Builders Forum
- Topic: Fret leveling question
- Replies: 22
- Views: 19648
Re: Fret leveling question
I am speaking of the fret tang . If you have too large a tang you will exert a good bit of force on the top. I also use fish glue as a filling agent when I fret. You want that fret board as flat and true as possible. If your tang pushes on the end grain in the slot it can cause the fret board to dip...
- Wed Dec 26, 2012 2:11 am
- Forum: Instrument Builders Forum
- Topic: Fret leveling question
- Replies: 22
- Views: 19648
Re: Fret leveling question
You want the bottom of the nut slot to be about .007 above the plane of the top off the frets.
a 2 3 action means
2/32 in and 3/32 in
a 2 3 action means
2/32 in and 3/32 in
- Wed Dec 26, 2012 2:10 am
- Forum: Instrument Builders Forum
- Topic: Merry Christmas
- Replies: 6
- Views: 7048
- Tue Dec 25, 2012 10:52 am
- Forum: Instrument Builders Forum
- Topic: Fret leveling question
- Replies: 22
- Views: 19648
Re: Fret leveling question
Taking fretting to the next level , I used to do it the way lots of you described. I took my playability to the next level when I started doing this. 1 Set neck and plane fretboard. 2 Fret neck. use a smaller tang fret at the fret board extension 3 level and dress frets. What this does , is allow to...
- Mon Dec 24, 2012 9:34 am
- Forum: Anything Goes
- Topic: It's that time of the year
- Replies: 12
- Views: 11254
- Thu Dec 20, 2012 11:22 pm
- Forum: Tutorials
- Topic: intonation primer
- Replies: 18
- Views: 25768
Re: intonation primer
EDIT POINT
on the last section I stated 2 1/2 64 and 3 1/2 64
please change that to 2 1/2 / 32 and 3 1/2 / 32
thanks gad you like it
on the last section I stated 2 1/2 64 and 3 1/2 64
please change that to 2 1/2 / 32 and 3 1/2 / 32
thanks gad you like it
- Thu Dec 20, 2012 11:28 am
- Forum: Tutorials
- Topic: intonation primer
- Replies: 18
- Views: 25768
intonation primer
When setting up a guitar , how can I be sure I will have good intonation? This is a common question and one that has many answers. I hope this explanation will help you understand what it is and how you can make the best adjustments for your situation 1st , What is intonation? This is matching the s...
- Mon Dec 17, 2012 4:01 am
- Forum: Instrument Builders Forum
- Topic: Outside mould and stretchers
- Replies: 8
- Views: 7965
Re: Outside mould and stretchers
what you do put into a guitar has to come out. take a piece of anything to simulate the top and make a hole in that , the same size as the hole you plan to use. If it don't come out make the spreader a little smaller. Yes a spreader is wood and I put foam on the mate surface . It isn't that difficul...
- Mon Dec 17, 2012 12:35 am
- Forum: Instrument Builders Forum
- Topic: Influence of the cap iron on hand plane
- Replies: 6
- Views: 6350
Re: Influence of the cap iron on hand plane
Having been around hand planes my whole life , it is nice to see a detail pic and explanation of the breaking iron. My Pop showed me many tricks and now after 60 yrs I can see why , Great stuff .
- Mon Dec 17, 2012 12:32 am
- Forum: Instrument Builders Forum
- Topic: Outside mould and stretchers
- Replies: 8
- Views: 7965
Re: Outside mould and stretchers
Just remember what goes in gotta come out. I use a turn buckle and then to be sure they come out cut a hole the same size as your sound hole you plane to use. I use 1 spreader on the waste and a 1/2 inch down on the neck and tail block. Then I can reach in and cut the down and pull the spreader. My ...
- Thu Dec 13, 2012 10:39 pm
- Forum: The Gallery
- Topic: john reid built a guitar in a class in July at blues creek
- Replies: 3
- Views: 4732
john reid built a guitar in a class in July at blues creek
Many of you know me for my Jigs but John Reid Took a class with me to build a guitar. His first guitar , based off a pre war Martin Design. 14 Fret Dred with some figured African Mahogany Nitro finish , 5/16 red spruce braced . A maple walnut chevron purfling. Simple and sounds killer. Top is sitka ...
- Wed Dec 05, 2012 8:54 am
- Forum: Jigs & Fixtures
- Topic: The way I do it: Neck carving
- Replies: 13
- Views: 28489
- Fri Nov 30, 2012 2:23 am
- Forum: Anything Goes
- Topic: On-line Credit Card Fraud.
- Replies: 9
- Views: 8379
Re: On-line Credit Card Fraud.
When in doubt don't As a business we try very hard to be as secure as we can. I have to say that I never had a issue since I started using Paypal Ccard terminal. I have had card denied until the customer called their card company to assure this was legit. I would rather be declined than depleted NEV...