bobbin sanders

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
nkforster
Myrtle
Posts: 83
Joined: Tue Oct 30, 2012 1:02 am
Location: Brisbane
Contact:

bobbin sanders

Post by nkforster » Mon Sep 10, 2018 3:26 pm

The last sander I had was one of these:

https://www.machineryhouse.com.au/W843

It was ok, it did the job, not as good as the bigger machine I had before that, but it did what I needed. I've just seen this one:

https://www.ebay.com.au/p/Powertec-OS14 ... 396&chn=ps

It looks pretty similar. Anyone got one? Any views?

User avatar
WJ Guitars
Myrtle
Posts: 59
Joined: Thu Jan 26, 2017 4:28 pm
Location: Sutherland NSW

Re: bobbin sanders

Post by WJ Guitars » Mon Sep 10, 2018 4:14 pm

I have not seen either of theses sander products shown from the links you have prodided. However, an Engineer friend of mine from Orange uses a variety of machinery with good reliable results that have come from 'Hare Forbes'. I have a 'Jet' Oscillating Spindle Sander, Model JBOS-5, cost me around $650.00 and it has proven to be a very good sander.

Wayne

simso
Blackwood
Posts: 1604
Joined: Mon Apr 25, 2011 10:36 pm
Location: Perth WA

Re: bobbin sanders

Post by simso » Mon Sep 10, 2018 4:53 pm

One of those you get what you pay for things, the one you link is really for hobby stuff, using it on a commercial scale, means it has a very limited life.

For note, I have this one

Steve

https://www.machineryhouse.com.au/W795
Steve
Master of nothing,

Do your own repairs - http://www.mirwa.com.au/How_to_Series.html

User avatar
nkforster
Myrtle
Posts: 83
Joined: Tue Oct 30, 2012 1:02 am
Location: Brisbane
Contact:

Re: bobbin sanders

Post by nkforster » Mon Sep 10, 2018 7:22 pm

That's the one I had first, it was great, but sold it when I went to Germany. For the number of instruments I make, the light one is fine. I had one for two years in Germany and never had an issue with it. It ended up with a pal as part of a deal we did.

I'm just interested to know if anyone owns the second one I posted.

User avatar
Mark McLean
Blackwood
Posts: 655
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: bobbin sanders

Post by Mark McLean » Mon Sep 10, 2018 9:28 pm

I have got that Scheppach model that you are already famiiar with. Not great, but not bad, and enough for my modest needs. It is hard to imagine that the "Powertec" one is any better - but I can't tell you for sure.

User avatar
Allen
Blackwood
Posts: 5053
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: bobbin sanders

Post by Allen » Tue Sep 11, 2018 6:41 am

I have to full size cabinet model by Jet. No comparison to the hobby bench top ones.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
Valben
Beefwood
Posts: 28
Joined: Fri Apr 13, 2018 3:16 pm

Re: bobbin sanders

Post by Valben » Tue Sep 11, 2018 7:17 am

I also have that Scheppach sander and for my limited usage I am happy with it and never had any problem :)

User avatar
nkforster
Myrtle
Posts: 83
Joined: Tue Oct 30, 2012 1:02 am
Location: Brisbane
Contact:

Re: bobbin sanders

Post by nkforster » Tue Sep 11, 2018 8:37 am

Found another - looks like a step up from the plastic bodied ones...Any users out there?

https://www.gasweld.com.au/535815-toolex

Crafty Fox
Blackwood
Posts: 122
Joined: Sun Mar 06, 2011 3:09 pm
Location: Perth, WA

Re: bobbin sanders

Post by Crafty Fox » Tue Sep 11, 2018 11:02 am

Hi Nigel,

Carbatec has their head office in Brisbane and sell a small range of the sanders. I fancy the Jet benchtop one.

I recently had issues with Hare & Forbes when a thicknesser motor mount broke after very few hours usage (under 10).
As the warranty had expired, I had to get Consumer Protection on board (machine 'not fit for purpose') before Machinery House "volunteered" to replace the motor.
I did get satisfaction but I really had to fight for it.

So I advise you, me, and others, to read their reviews prior to purchase.

And I'm sure you are aware that USA imports will be 110 volts.
Ken

Joseph Jones
Gidgee
Posts: 6
Joined: Wed Aug 08, 2018 11:56 am
Location: Narrikup WA

Re: bobbin sanders

Post by Joseph Jones » Tue Sep 11, 2018 12:09 pm

Wouldn’t recommend hare and forbes, my drillpress is almost useless.

Joseph

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests