Bad Router Day

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
TallDad71
Myrtle
Posts: 87
Joined: Thu Jan 19, 2017 6:20 am
Contact:

Bad Router Day

Post by TallDad71 » Sat Mar 16, 2019 4:21 am

Everything was going so well until it wasn’t!

I was cutting a binding channel 1.5mm around the lower bout of the top of the guitar with my router. The guide bush worked itself loose in the blink of an eye, I had two choices, quickly avert my gaze or risk a guide bush in the face.

I averted and can now clearly see the damage caused by the router bit gnarling inside the top. I have patched up the damage with a 2cm square patch but it looks bloody atrocious.

Does anyone have any magic method for making it more camouflaged?
Alan

User avatar
demonx
Blackwood
Posts: 1315
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Bad Router Day

Post by demonx » Sat Mar 16, 2019 8:21 am

Pics?

P.S. We’ve all had bad router days. I myself have had many. Luckily it’s always only been timber damaged and not flesh.

User avatar
Mark McLean
Blackwood
Posts: 709
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: Bad Router Day

Post by Mark McLean » Sat Mar 16, 2019 9:00 am

Commiserations. This is why the sunburst finish was invented.

User avatar
56nortondomy
Blackwood
Posts: 493
Joined: Sat Jan 14, 2012 11:56 pm
Location: Melbourne western suburbs

Re: Bad Router Day

Post by 56nortondomy » Sat Mar 16, 2019 6:48 pm

Maybe an opportunity for an inlay, of course it depends on the position. Wayne

seeaxe
Blackwood
Posts: 489
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Bad Router Day

Post by seeaxe » Mon Mar 18, 2019 3:47 pm

Been there, done that. Mine was on a cedar top. I patched it with a piece from the same top but after several years it still sticks out like the proverbial dogs bollocks. Its pretty much the first thing I see whenever I pick it up.

In hindsight I might have been better off to have put paua shell or something equally distinct from the top, following the "if you cant hide it make it very obvious" theory.

Good luck whatever you do.

Cheers
Richard

Fisherman
Blackwood
Posts: 155
Joined: Tue Dec 31, 2013 7:10 pm
Location: Canberra

Re: Bad Router Day

Post by Fisherman » Tue Mar 19, 2019 12:45 pm

top or bottom of the guitar? if the top perhaps install an armrest ..

Bottom, i would probably start on a new top - sorry. If there is a good invisible repair i would love to learn it too!

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests