Information for Martin or Gibson replicas

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
Smithy
Gidgee
Posts: 1
Joined: Fri Jun 07, 2019 2:45 pm

Information for Martin or Gibson replicas

Post by Smithy » Tue Jun 18, 2019 6:35 pm

Hi all,

I'm new to this forum so I hope this is the right place for this post. I've built two cigar box ukes and one fairly vanilla tenor design.
I now want to try something more ambitious, a replica or near relica of an early Martin or Gibson soprano. Can anyone recommend a source for dimensions, scale length, type of neck joint and the bracing pattern(s) they used?
I don't need plans per se, just basic dimensions, but am happy to purchase plans if they are available. The outside design isn't a problem I've got no shortage of photo's to work from.
I plan on using blackwood rather than koa or mahogany for the body and blackwood or Queensland maple for the neck. Haven't thought about bracing yet but would like to use an Australian timber for that too, maybe bunya or king billy (to date I've used spruce).
I've also been searching for plans for early Hawaiian style instruments if anyone knows a source of information on them too.

Thanks,
Smithy

Post Reply

Who is online

Users browsing this forum: Google, Mark McLean and 19 guests