Anyone on the Gold Coast QLD capable of resawing a 18mm board into bookmatched top?

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
dwrockdoctor
Gidgee
Posts: 4
Joined: Sun May 19, 2019 12:39 pm

Anyone on the Gold Coast QLD capable of resawing a 18mm board into bookmatched top?

Post by dwrockdoctor » Mon Feb 24, 2020 12:28 pm

Hi all,

I have two nice pieces of figured tasmanian oak around 18mm thick each and want to have them resawed into book matched tops, is there anyone that can be recommended on the Gold Coast/Tweed area to do the resaw as my budget bandsaw is not up to the task.

Scared I'll get chased out of most normal businesses as it is such a small job.

Thanks in advance!

RodC
Myrtle
Posts: 57
Joined: Thu Jan 31, 2019 4:00 pm

Re: Anyone on the Gold Coast QLD capable of resawing a 18mm board into bookmatched top?

Post by RodC » Mon Feb 24, 2020 2:54 pm

There used to be a guy in BillyNudgel.
https://www.billinudgelwoodworks.com.au.
He offered to resaw and assist with side bending one of my projects.
I didn't take him up as I found assistance closer to home, but you could try there.

dwrockdoctor
Gidgee
Posts: 4
Joined: Sun May 19, 2019 12:39 pm

Re: Anyone on the Gold Coast QLD capable of resawing a 18mm board into bookmatched top?

Post by dwrockdoctor » Mon Feb 24, 2020 8:36 pm

Great, thank you! Good to know there are services local, Billinudgel is only about 20-30 minutes south, much nicer drive than dealing with Gold Coast traffic anyway, haha.

Post Reply

Who is online

Users browsing this forum: No registered users and 97 guests