Pressed Uke Back

Moderators: kiwigeo, Jeremy D

Post Reply
luke_lee
Sassafras
Posts: 48
Joined: Thu Nov 25, 2010 6:54 pm
Location: Sydney

Pressed Uke Back

Post by luke_lee » Sun Dec 19, 2010 6:34 pm

Hi all,

I have been experimenting with veneer uke back press into a radius. Here are some pics of the jig I used.
BackJIG.jpg
Back press
It’s a two part mould, positive and a negative. I used 3 veneers and the centre one is cross grain (like ply) and Urea-formaldehyde resin to glue them. The thickenss is 1.6mm thick.

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests