Worth the Trouble

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Worth the Trouble

Post by woodrat » Wed May 18, 2011 2:15 pm

This is not very exciting I know but I thought that I would post a couple of pics for others to see. I dont like making jigs etc but sometimes you may have noticed you have to! I had been looking for these veneer screws in AUS for a while and Mcjings in Sydney had them for less than a tenner each so I bough 5 of them. One made it into my bender to replace the threaded rod that was collapsing, the threaded rod is just not HD enough but these screws are very HD. Anyway I decided to knock up a couple of little presses that have become very useful. It is just a block with an overhead frame that is joined with a dry dovetail to be able to fit the screw into it. Pretty simple and quick to make. At least it frees up a hand to hold a stacked heel to stop it from sliding around instead of having to try to hold the clamp and do it up as well as keep the alignment on the heel with slippery glue on it:) I have also found it useful for gluing fingerboards on and headplates. It was easy to make and was definitely worth the trouble so now I can get back to making guitars :) I hope somebody finds this useful.
Press.jpg
Attachments
Press 2.jpg
"It's never too late to be what you might have been " - George Eliot

User avatar
Kim Strode
Blackwood
Posts: 215
Joined: Fri Oct 19, 2007 8:11 am
Location: Daylesford Victoria, Australia

Re: Worth the Trouble

Post by Kim Strode » Wed May 18, 2011 6:19 pm

I had a look on the McJings website but couldn't find those clamps. Would you be able to reply with a link please.
Kim Strode
Daylesford, Australia

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: Worth the Trouble

Post by woodrat » Wed May 18, 2011 6:41 pm

Hi Kim, here you go.....http://www.mcjing.com.au/searchresult.a ... ord=pc-250

The WoodRat

aka John
"It's never too late to be what you might have been " - George Eliot

User avatar
Kim Strode
Blackwood
Posts: 215
Joined: Fri Oct 19, 2007 8:11 am
Location: Daylesford Victoria, Australia

Re: Worth the Trouble

Post by Kim Strode » Wed May 18, 2011 7:20 pm

Thanks for the link John, I was impressed by your glueing clamp jig.
Kim Strode
Daylesford, Australia

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: Worth the Trouble

Post by woodrat » Wed May 18, 2011 9:30 pm

Thanks Kim, As I said its not very exciting but it is very useful! I just needed to get around to making it!

The WoodRat

aka John
"It's never too late to be what you might have been " - George Eliot

User avatar
charangohabsburg
Blackwood
Posts: 1818
Joined: Sat Oct 16, 2010 1:25 am
Location: Switzerland

Re: Worth the Trouble

Post by charangohabsburg » Wed May 18, 2011 9:35 pm

Heavy duty clamp, heavy duty wood and dovetail joints. I like that jig. It seems to be very useful and simple. Great design. :cl
Markus

To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.

User avatar
Nick
Blackwood
Posts: 3641
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Worth the Trouble

Post by Nick » Thu May 19, 2011 6:12 am

Bloody Australians! Even your clamps are made out of interesting woods! :lol: Nice Job John & will no doubt prove to be a great investment. :cl
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: Worth the Trouble

Post by woodrat » Thu May 19, 2011 7:18 am

:) Hi Nick, The wood actually came from a 14 x 3 inch beam offcut that I had saved for 10 years. The beam went into a house and there was about 2 foot left so I snaffled it. It was a common or garden eucalypt but the colour was indeed very nice. Should I french polish them?:)

The WoodRat

aka John
"It's never too late to be what you might have been " - George Eliot

User avatar
Kim
Admin
Posts: 4376
Joined: Wed Sep 26, 2007 8:32 pm
Location: South of Perth WA

Re: Worth the Trouble

Post by Kim » Thu May 19, 2011 7:41 am

woodrat wrote::) Should I french polish them?:)

The WoodRat

aka John
Only after the inlay is finished John...nice innovation mate 8)

Cheers

Kim

User avatar
charangohabsburg
Blackwood
Posts: 1818
Joined: Sat Oct 16, 2010 1:25 am
Location: Switzerland

Re: Worth the Trouble

Post by charangohabsburg » Thu May 19, 2011 8:56 am

Oh, I forgot to ask why those titebond drops are running upwards... :?: OK, maybe it's because it's because you live in Down Under? Does this happen to someone else of you guys?
Markus

To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: Worth the Trouble

Post by woodrat » Thu May 19, 2011 2:07 pm

Well Spotted Markus, yes of course thats the reason....sometimes it can be pretty inconvenient living upside down!

Kim, the inlay...I'm on to it!

The WoodRat

aka John
"It's never too late to be what you might have been " - George Eliot

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests