Plate joint jig for go-bar deck

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Valben
Myrtle
Posts: 80
Joined: Fri Apr 13, 2018 3:16 pm

Plate joint jig for go-bar deck

Post by Valben » Sat May 19, 2018 1:33 pm

hi All, if you are using a go-bar deck, here a simple solution for joining top & back:
I do not have much space so my deck is at floor level and I am using the top of the deck to join plates, then when done it becomes a usable work surface.

4 small notches to guide the clamps and some clear tape to avoid gluing the plates to the deck surface.
Attachments
2164CF5A-AA75-471F-9197-2DEA7528D9AE.jpeg
758FDFC1-F5C5-4941-99E7-06512B593390.jpeg
73CF0995-1C3E-49D1-A0C4-576764AF79E3.jpeg

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests