Babinga & Ancient Spruce Tenor

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Babinga & Ancient Spruce Tenor

Post by Allen » Thu Apr 18, 2013 5:56 am

This is the first time I've used Babinga. Had several sets on the racks for years and the client whom this is for was keen to get something really flashy. It's quite difficult to work with. Hard as nails and the pores are just huge, so takes quite a bit to fill them.

Top - Ancient Spruce
Back and Sides - Babinga
Fret Board - Gidgee with 12" radius
Bridge - Gidgee
Bindings - Blackwood
Rosette - Some unkown burl with Pau Abalone
Headplates - Gidgee
Neck - Spanish Cedar with CF truss rod
Finish - Mirotone over epoxy pore fill
Tuners - Hipshot
Strings - South Coast Ukes
babinga_ancient_spruce-tenor-1.jpg
babinga_ancient_spruce-tenor-1.jpg (39.55 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-2.jpg
babinga_ancient_spruce-tenor-2.jpg (43.15 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-3.jpg
babinga_ancient_spruce-tenor-3.jpg (97.06 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-4.jpg
babinga_ancient_spruce-tenor-4.jpg (62.79 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-5.jpg
babinga_ancient_spruce-tenor-5.jpg (68.64 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-6.jpg
babinga_ancient_spruce-tenor-6.jpg (39.47 KiB) Viewed 16649 times
babinga_ancient_spruce-tenor-7.jpg
babinga_ancient_spruce-tenor-7.jpg (36.59 KiB) Viewed 16649 times
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
charangohabsburg
Blackwood
Posts: 1818
Joined: Sat Oct 16, 2010 1:25 am
Location: Switzerland

Re: Babinga & Ancient Spruce Tenor

Post by charangohabsburg » Thu Apr 18, 2013 6:00 am

Oh, now the tuner knobs match the headstock! 8)
Markus

To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.

User avatar
68matts
Blackwood
Posts: 144
Joined: Fri Sep 23, 2011 10:34 am
Location: Weston, Hunter Valley

Re: Babinga & Ancient Spruce Tenor

Post by 68matts » Thu Apr 18, 2013 6:50 am

That's got to be one of the prettiest little things I've ever seen.
Beautiful work again Alan :cl :cl :cl
Matt

User avatar
steve roberts
Blackwood
Posts: 154
Joined: Thu May 24, 2012 5:15 pm
Location: coffs harbour

Re: Babinga & Ancient Spruce Tenor

Post by steve roberts » Thu Apr 18, 2013 6:59 am

Hi Allen
Fabulous work as usual the ancient spruce is amazing
Regards Steve

User avatar
Bob Connor
Admin
Posts: 3132
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Re: Babinga & Ancient Spruce Tenor

Post by Bob Connor » Thu Apr 18, 2013 7:37 am

Love your work Al.

You've got to slow down a bit. you're putting the rest of us to shame.

Regards
Bob, Geelong
_______________________________________

Mainwaring and Connor Guitars


Kev3
Blackwood
Posts: 117
Joined: Fri Oct 12, 2012 12:35 pm
Location: Townsville, Queensland

Re: Babinga & Ancient Spruce Tenor

Post by Kev3 » Thu Apr 18, 2013 11:45 am

Stop it ! 4 in a row is too much - but this is a real stunning looking instrument
...............
Kevin

User avatar
kiwigeo
Admin
Posts: 10600
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Babinga & Ancient Spruce Tenor

Post by kiwigeo » Thu Apr 18, 2013 12:18 pm

Bob Connor wrote:Love your work Al.

You've got to slow down a bit. you're putting the rest of us to shame.

Regards
I agree. Its been at least 3 days since we banned somebody :mrgreen:
Martin

nnickusa
Blackwood
Posts: 902
Joined: Sat Feb 04, 2012 4:07 pm
Location: Brunswick Heads, NSW

Re: Babinga & Ancient Spruce Tenor

Post by nnickusa » Thu Apr 18, 2013 12:42 pm

Gotta say, Allen, you've got thisstuff figured out all right.... :cl
I wish I was half the man my dog thinks I am....

Cheers,
Nick

https://www.facebook.com/pages/DMI-hand ... 744?ref=hl

User avatar
Nick
Blackwood
Posts: 3642
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Babinga & Ancient Spruce Tenor

Post by Nick » Thu Apr 18, 2013 1:45 pm

kiwigeo wrote:
Bob Connor wrote:Love your work Al.

You've got to slow down a bit. you're putting the rest of us to shame.

Regards
I agree. Its been at least 3 days since we banned somebody :mrgreen:
I agree with both of those comments, and have suggested a ban in one of the other beauties posts, it's time for action!
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Babinga & Ancient Spruce Tenor

Post by Allen » Thu Apr 18, 2013 5:48 pm

Common now fellas. A week long ban should be sufficient.

Seems like forever that I managed to get anything finished....but there are 4 more on the bench for clients, and I've got to pull my finger out.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

lauburu
Blackwood
Posts: 229
Joined: Sun Oct 17, 2010 7:25 am
Location: Auckland NZ

Re: Babinga & Ancient Spruce Tenor

Post by lauburu » Thu Apr 18, 2013 6:58 pm

OMG Four more bloody ukes to come.
Don't ban him. It'll just give him more time to create masterpieces.
Make him contribute tutorials instead. That should slow him down.
Miguel

User avatar
martintaylor
Blackwood
Posts: 288
Joined: Sun Dec 02, 2012 9:17 am
Contact:

Re: Babinga & Ancient Spruce Tenor

Post by martintaylor » Thu Apr 18, 2013 7:29 pm

I am sitting here just stunned. What an amazing collection of ukes. It is so nice to see someone that cares so much with their work. If I ever come to Cairns I would love to drop in and see you at work on these little beauties. Such an inspiration.

Martin

User avatar
PHANTOM
Blackwood
Posts: 148
Joined: Sat Aug 23, 2008 7:00 pm
Location: gladstone qld

Re: Babinga & Ancient Spruce Tenor

Post by PHANTOM » Thu Apr 18, 2013 8:25 pm

the four of them are just amazing great work I cant wait to see the next ones
Carpe Diem

User avatar
charangohabsburg
Blackwood
Posts: 1818
Joined: Sat Oct 16, 2010 1:25 am
Location: Switzerland

Re: Babinga & Ancient Spruce Tenor

Post by charangohabsburg » Thu Apr 18, 2013 8:31 pm

Allen wrote:Common now fellas. A week long ban should be sufficient.
Sufficient for what? Sufficient for building another four ukes? :lol:
Markus

To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.

Gazm
Blackwood
Posts: 132
Joined: Sun Sep 04, 2011 11:25 am

Re: Babinga & Ancient Spruce Tenor

Post by Gazm » Thu Apr 18, 2013 10:51 pm

What else can one add to the repertoire of accolades....simply fabulous!!!! :cl :cl :cl .

Gaz

KLW
Kauri
Posts: 35
Joined: Fri Apr 05, 2013 9:29 am
Location: Wet Coast Canada

Re: Babinga & Ancient Spruce Tenor

Post by KLW » Sat Apr 20, 2013 3:59 am

Damn Nice.. You seem to have cornered the market on Ancient Spruce, Well done

Kerry
KLW Strings Luthier Blog...
http://klwstrings.blogspot.ca/

User avatar
ozwood
Blackwood
Posts: 624
Joined: Fri Oct 15, 2010 11:04 pm
Location: Newcastle

Re: Babinga & Ancient Spruce Tenor

Post by ozwood » Sat Apr 20, 2013 9:55 am

That Ancient Spruce is something special , did not look Much in it's raw state on Brents website , but now to see it on a uke it looks great.

That whole asthetic works really well Allen :cl :cl :cl :cl :cl :cl :cl :cl :cl

Cheers,
Paul .

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests