Sapele Parlour Guitar

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Sapele Parlour Guitar

Post by Allen » Fri Sep 12, 2014 3:18 pm

Been awhile since I've had a request for a steel string guitar. This one actually started out as a Guitalele but through discussing the clients other instruments I was asked if I could do a short scale steel string but still tuned E to e. He was adamant that it had to be a looker. Nothing bland as he likes to look at his instruments as much as play them.

This is what I came up with built on my Baritone body with a 22" scale length.

Back and Sides - Pommele Sapele
Top - Sitka Spruce
Neck - Brazilian Mahogany
Head Plate - York Gum Burl
Fret Board - Ebony with compound radius
Bindings - Sapele
Block Inlays - Gold MOP
Tuners - Hipshot
Pickup - K&K
Finish - Mirotone
Strings - D'Addario EXP16
Sapele Parlour Guitar-4.jpg
Sapele Parlour Guitar-6.jpg
Sapele Parlour Guitar-5.jpg
Sapele Parlour Guitar-2.jpg
Sapele Parlour Guitar.jpg
Sapele Parlour Guitar-3.jpg
Sapele Parlour Guitar-8.jpg
Sapele Parlour Guitar-7.jpg
Sapele Parlour Guitar-9.jpg
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

GregL
Blackwood
Posts: 229
Joined: Fri Apr 03, 2009 10:01 am
Location: Lismore, NSW

Re: Sapele Parlour Guitar

Post by GregL » Fri Sep 12, 2014 4:26 pm

Hi Allen,

Gee that looks nice!
How does that size compare to a terz-size guitar? (I think that's a Martin size 5?)
What are the bridge pins made of?

Thanks,
GregL.

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Sapele Parlour Guitar

Post by Allen » Fri Sep 12, 2014 4:38 pm

The body is a bit smaller than the Style 5, but not by much. The scale length is 22" and the Style 5 is a bit shorter at 21 3/4" from memory. But the Style 5 is generally tuned up from standard E-e guitar tuning.

Bridge pins are Box Wood from Gurian Instruments. I like them to add some contrast and compliment the spruce top.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
56nortondomy
Blackwood
Posts: 674
Joined: Sat Jan 14, 2012 11:56 pm
Location: Melbourne western suburbs

Re: Sapele Parlour Guitar

Post by 56nortondomy » Fri Sep 12, 2014 4:43 pm

Very nice Allen
Wayne

User avatar
ozwood
Blackwood
Posts: 624
Joined: Fri Oct 15, 2010 11:04 pm
Location: Newcastle

Re: Sapele Parlour Guitar

Post by ozwood » Fri Sep 12, 2014 7:25 pm

Nice one Allan,

Perfection as always. :cl :cl :cl :cl :cl

Love the little Guitars!

Makes Mine look Plain :(

Cheers,
Paul .

Dave
Myrtle
Posts: 77
Joined: Sat Oct 11, 2008 7:16 pm

Re: Sapele Parlour Guitar

Post by Dave » Sat Sep 13, 2014 4:45 am

Great guitar Allen I really like the Pommele Sapele and the rosette looks great :)

Dave

GregL
Blackwood
Posts: 229
Joined: Fri Apr 03, 2009 10:01 am
Location: Lismore, NSW

Re: Sapele Parlour Guitar

Post by GregL » Sat Sep 13, 2014 7:27 am

Hi Allen,

Again, that's a nice guitar!
A couple more questions if that's ok!
How is the string tension with the short scale?
Is the bridge also ebony?

Thanks,
GregL.

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Sapele Parlour Guitar

Post by Allen » Sat Sep 13, 2014 7:39 am

Working out the appropriate strings for the scale length was probably the most stressful part of the build.

Using D'Addario's string tension calculator, I worked out the tension on each string in various sets at a standard scale length. Then had to do the same calculations to find a set of stings that gave similar tension at the shorter scale. So ended up with 120 lbs total tension with this set. I could have picked each string individually, but wanted something easy for the client to replace when required.

So yes, with the EXP16's the tension is good. Some of the Blue Grass sets would have pushed the tension up to 150'bs, but that was more tension than I wanted, plus those strings are like fencing wire. Lighter gauges would be down to 80lbs and I don't think would have been appropriate at all.

Bridge is ebony.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
charangohabsburg
Blackwood
Posts: 1818
Joined: Sat Oct 16, 2010 1:25 am
Location: Switzerland

Re: Sapele Parlour Guitar

Post by charangohabsburg » Sat Sep 13, 2014 11:10 am

This is a great looking (as usual) little guitar, Allen. Is it just a matter of time until you start to build bass guitars and even bigger monsters? :wink:
Markus

To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.

flounder
Gidgee
Posts: 3
Joined: Sat May 25, 2013 5:23 pm

Re: Sapele Parlour Guitar

Post by flounder » Sat Sep 13, 2014 5:13 pm

I love how you do your headstocks! The binding and back strap are just perfect! If I could request a tuit from any maker on any subject, it would be on headstocks from you! :cl

User avatar
Nick
Blackwood
Posts: 3641
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Sapele Parlour Guitar

Post by Nick » Mon Sep 15, 2014 6:44 am

homer.jpeg
Mmmmmmm me like :)
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
H3ytm@n
Blackwood
Posts: 149
Joined: Sat Jun 25, 2011 12:09 pm

Re: Sapele Parlour Guitar

Post by H3ytm@n » Sat Sep 20, 2014 12:22 pm

Great guitar!!
Love those tuners
Mike

User avatar
Taffy Evans
Blackwood
Posts: 995
Joined: Wed Apr 30, 2008 6:54 pm
Location: Charters Towers North Queensland

Re: Sapele Parlour Guitar

Post by Taffy Evans » Thu Sep 25, 2014 7:27 am

Nice guitar Allen, very neat. I always liked the Art Deco look of those tuners, but found them very heavy, but then looking at the back I can see they have been lightend with the exposed gears.
Taff

Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests