Page 1 of 1

Baritione Uke with Sound Port and Arm Bevel

Posted: Fri Feb 09, 2018 1:47 pm
by Allen
Been a while since I did an arm bevel on an instrument, and thought I'd do a spec build and brush up on the proceedure. They certainly are a challenge when you pick figured timber to do them.

This instrument has a 21.5" scale length and made from Australian Blackwood with a Yellow Cedar soundboard. Bindings are Ringed Gidgee. Fret board is Gidgee and all other trim is Blackwood. Rubner tuners and K&K Aloha Twin pickup installed. Finished in high gloss polyurethane.
Blackwood and Yellow Cedar Baritone1.jpg
Blackwood and Yellow Cedar Baritone2.jpg
Blackwood and Yellow Cedar Baritone3.jpg
Blackwood and Yellow Cedar Baritone4.jpg
Blackwood and Yellow Cedar Baritone5.jpg
Blackwood and Yellow Cedar Baritone6.jpg
Blackwood and Yellow Cedar Baritone7.jpg
Blackwood and Yellow Cedar Baritone8.jpg
Blackwood and Yellow Cedar Baritone9.jpg
Blackwood and Yellow Cedar Baritone10.jpg
Blackwood and Yellow Cedar Baritone11.jpg
Blackwood and Yellow Cedar Baritone12.jpg
Blackwood and Yellow Cedar Baritone13.jpg

Re: Baritione Uke with Sound Port and Arm Bevel

Posted: Fri Feb 09, 2018 7:25 pm
by Kamusur
Very very sweet Allen, many kudos.

Steve

Re: Baritione Uke with Sound Port and Arm Bevel

Posted: Fri Feb 09, 2018 8:21 pm
by colburge
Beautiful instrument, I would be proud to own it.

Col

Re: Baritione Uke with Sound Port and Arm Bevel

Posted: Sun Feb 11, 2018 8:44 am
by Mark McLean
The combo of ringed gidgee bindings with that blackwood is a real treat Allen. Nice proportions on the arm bevel too. Great job all round.

Re: Baritione Uke with Sound Port and Arm Bevel

Posted: Mon Feb 12, 2018 8:15 am
by lamanoditrento
Lovely instrument :cl :cl :cl I agree with Mark, the arm bevel proportions are really nice

Re: Baritione Uke with Sound Port and Arm Bevel

Posted: Fri Feb 16, 2018 6:49 am
by Tootalltom
Great style and look. Love the sound hole shape and rosette.