12 frets cutaway in Blackwood/Redwood

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
Valben
Beefwood
Posts: 22
Joined: Fri Apr 13, 2018 3:16 pm

12 frets cutaway in Blackwood/Redwood

Post by Valben » Sun May 13, 2018 8:08 am

Hi All, this is my first post here, hopefully I will get it right :D
This my last built :
- 12 frets to body with cutaway
- Blackwood B&S
- Figured Redwood soundboard
- Mahogany neck
- Amazon Rosewood fretboard with Brazilian rosewood bridge
- Maple bindings

I built this girly guitar for my niece with narrow neck, reduced string spacing and extralight construction (redwood helps :D )
It sounds really awesome with 12 gauge strings tuned 1/2 step down.

I have also recently completed a 12 strings cutaway, will post pics in future.
Cheers
Attachments
1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
7.jpg
8.jpg
9.jpg
10.jpg

User avatar
Mark McLean
Blackwood
Posts: 636
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: 12 frets cutaway in Blackwood/Redwood

Post by Mark McLean » Thu May 17, 2018 5:50 am

Hello, and welcome to ANZLF. Those are a couple of nice instruments that you ahve shown us. Very well put together. The redwood and blackwood combo looks sweet. It is a timber pairing that I haven't seen before but I imagine that it would go well for an acoustic.

I notice a couple of unusual features of your build. A zero fret - which is something that I like to use, but don't see many others doing. And I notice you didn't do that with your reso.

The second thing is the pinned bridge with nylon strings (I presume they have ball ends?). This is something I have thought about, because tie-down bridges give me the shits. Would you recommend it? Thanks for showing us your work. You are obviously thinking about your builds a lot, and it is nice to see things that take an individual path and go a bit away from the conventional plans.
Cheers
Mark

Valben
Beefwood
Posts: 22
Joined: Fri Apr 13, 2018 3:16 pm

Re: 12 frets cutaway in Blackwood/Redwood

Post by Valben » Thu May 17, 2018 9:12 am

Thanks Mark, glad you liked my creations. I usually spend a good amount of time/energy during the design phase and when selecting the combinations of woods.
The Custom Giulia actually uses Martin Silk & Steel strings with solid brass pins. I decided to install a zero glide nut in combination of brass pins and Silk&steel strings to provide clarity and brightness in combination with the extralight redwood top which enhance the low frequencies.
I am very satisfied with the resulting sound quality and I am considering to use the zero glide nut as standard with the next builds . Cheers

User avatar
lamanoditrento
Blackwood
Posts: 182
Joined: Thu May 05, 2016 9:50 am

Re: 12 frets cutaway in Blackwood/Redwood

Post by lamanoditrento » Mon May 28, 2018 4:36 pm

+1 for the wood combo - very nice

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests