Page 1 of 1

B/wood parlour

Posted: Sun Nov 04, 2018 8:30 pm
by 56nortondomy
I've just finished this guitar, a parlour size made from another great set of b/wood from Pete plenty of figure in it, the Huon top is also from Pete. Mahogany neck, EIRW f/b and bridge, jarrah bindings on the body and b/w bindings on the f/b. I used off cuts for the rosette and h/stock veneer. Hard shellac finish. Grover tuners. Sounds great I'm a bit of a Huon fan now, this is about the 4th time I've used it.
Wayne

Re: B/wood parlour

Posted: Sun Nov 04, 2018 9:12 pm
by WJ Guitars
The guitar looks amazing.

Wayne
https://wjguitars.wixsite.com/mysite-1

Re: B/wood parlour

Posted: Mon Nov 05, 2018 8:39 am
by lamanoditrento
Nice! How is the armrest attached, magnetised? Also, the endgraft is interesting with the asymmetrical end to the sides and with an ebony inlay. I feel like there is a story there. Anyhoo, very nice instrument :cl :cl

Re: B/wood parlour

Posted: Mon Nov 05, 2018 2:21 pm
by 56nortondomy
Thanks guys. You’re on the ball Trent, I cut one of the sides to a wrong pencil line which left the side about 20mm short so I widened the tail block and did a bit of creative work with the end graft normally I use a piece of bindings but couldn’t this time, nice pick up lol. Wayne

Re: B/wood parlour

Posted: Mon Nov 05, 2018 7:10 pm
by kiwigeo
Noticed it but was a bit afraid to ask what was going on. :mrgreen:
56nortondomy wrote:
Mon Nov 05, 2018 2:21 pm
Thanks guys. You’re on the ball Trent, I cut one of the sides to a wrong pencil line which left the side about 20mm short so I widened the tail block and did a bit of creative work with the end graft normally I use a piece of bindings but couldn’t this time, nice pick up lol. Wayne

Re: B/wood parlour

Posted: Mon Nov 05, 2018 8:19 pm
by 56nortondomy
We all make mistakes I don't mind owning up ( when I get caught out :lol: ) . The arm rest is glued on Trent.
Wayne

Re: B/wood parlour

Posted: Tue Nov 06, 2018 8:20 am
by lamanoditrento
56nortondomy wrote:
Mon Nov 05, 2018 8:19 pm
We all make mistakes I don't mind owning up ( when I get caught out :lol: ) . The arm rest is glued on Trent.
Wayne
I am sure we all make 'em and have that sinking feeling as you realise you have two treble sides or compensated nut I made on the weekend
turns out to be left-handed :oops: . But I also feel this is a safe place amongst peers where it is ok to talk about them and what you did to recover.

Good recovery by the way!

Re: B/wood parlour

Posted: Tue Nov 06, 2018 10:08 am
by Jim
Beautiful guitar and well done on the recovery- I missed it.....
Really like the huon top- how do you find it compares?

Re: B/wood parlour

Posted: Tue Nov 06, 2018 11:54 am
by 56nortondomy
Thanks Jim, I quite like the Huon. I think it sounds great maybe not quite as bright as spruce a little more mellow. I’m currently building a selmer that has a Huon top, owners request be interesting to see what it sounds like it has BRW b/s. Wayne

Re: B/wood parlour

Posted: Wed Nov 07, 2018 9:09 pm
by Fisherman
Wow that is a beautiful looking guitar! Nice curves ... beautiful timbers

Re: B/wood parlour

Posted: Thu Nov 08, 2018 11:18 pm
by 56nortondomy
Thanks Peter, I'm pretty happy with it despite the stuff up.
Wayne

Re: B/wood parlour

Posted: Sun Nov 11, 2018 6:55 pm
by Pat.Hawkins
Hi Wayne,
I hope you don't mind me harping back to the earlier comments but........

Here's one that I had to "adjust" :D
WP_20181111_16_39_03_Pro.jpg
I love what you've done .........
Gives me inspiration for all my future re-adjustments.
Cheers

Re: B/wood parlour

Posted: Sun Nov 11, 2018 7:08 pm
by 56nortondomy
No problem Pat, like I've said quite a few times, we all make stuff ups, there's usually some way around them ( maybe not every time ), gives the brain some exercise trying to figure out a solution ( after the initial swearing and cursing :lol: ).
Wayne