Page 1 of 1

new Flamenco

Posted: Wed Jan 15, 2020 9:36 pm
by martintaylor
Here's my Flamenco Blanca. Macrocarpa (Monterey Cypress) back and sides, Engelmann Spruce top, 5 fan bracing with small closing braces, Australian Red Cedar neck, Rosewood fretboard and bridge, Planetary pegs, Rosewood bindings, ridiculously brittle purflings and rosette (with some pink abalone). Total weight 1091gm. Finishes with Shellac (still to add a few more coats I think but I do like the satin look)
IMG_5128.jpg
IMG_5128.jpg (157.4 KiB) Viewed 14410 times
IMG_5123.jpg
IMG_5123.jpg (115.47 KiB) Viewed 14410 times
IMG_5120.jpg
IMG_5120.jpg (84.94 KiB) Viewed 14410 times
IMG_5119.jpg
IMG_5119.jpg (79.61 KiB) Viewed 14410 times
IMG_5113.jpg
IMG_5113.jpg (83.04 KiB) Viewed 14410 times
IMG_5112.jpg
IMG_5112.jpg (114.53 KiB) Viewed 14410 times
IMG_5111.jpg
IMG_5111.jpg (52.67 KiB) Viewed 14410 times
IMG_5109.jpg
IMG_5109.jpg (60.76 KiB) Viewed 14410 times
IMG_5103.jpg
IMG_5103.jpg (61.25 KiB) Viewed 14410 times
IMG_5099.jpg
IMG_5099.jpg (64.7 KiB) Viewed 14410 times
IMG_5093.jpg
IMG_5093.jpg (38.46 KiB) Viewed 14410 times
flamenco-weight.jpg
flamenco-weight.jpg (131.97 KiB) Viewed 14410 times

Re: new Flamenco

Posted: Wed Jan 15, 2020 10:03 pm
by martintaylor
here's the bracing
IMG_0769.jpg
IMG_0769.jpg (95.48 KiB) Viewed 14406 times

Re: new Flamenco

Posted: Thu Jan 16, 2020 12:02 pm
by asgilbert
Beautiful work. That rosette is a piece of art! :cl

Re: new Flamenco

Posted: Fri Jan 17, 2020 7:59 am
by sebastiaan56
So pretty! Are they planetary pegs?

Re: new Flamenco

Posted: Fri Jan 17, 2020 8:47 am
by GregL
Hi Martin,

Very nice!
A couple of questions, if I may:
What is the heastock overlay?
Where did you get the Australian Red Cedar for the neck? How do you like Aust Red Cedar? (I love it!)

Thanks,
GregL.

Re: new Flamenco

Posted: Fri Jan 17, 2020 7:29 pm
by seeaxe
Mmmmmm. And did you make all that purfling around the sides??? If so...respect. That's a lot of (lovely) work

Re: new Flamenco

Posted: Fri Jan 17, 2020 8:02 pm
by martintaylor
sebastiaan56 wrote:
Fri Jan 17, 2020 7:59 am
So pretty! Are they planetary pegs?
Hi Sebastian, yes they are! I'm not fully sold on them yet. I may go back to standard friction pegs.
GregL wrote:
Fri Jan 17, 2020 8:47 am
What is the headstock overlay?
Hi Greg, headstock overlay is Birdseye Huon Pine
GregL wrote:
Fri Jan 17, 2020 8:47 am
Where did you get the Australian Red Cedar for the neck? How do you like Aust Red Cedar? (I love it!)
Boutique Timbers in Rollands Plains NSW supplied the cedar https://goo.gl/maps/dUCfzYroGgXnT7CG8. I love using Australian Red Cedar for necks but must say the old growth stuff is the best. Some of the new growth timber from Nth QLD is a little soft for my liking but the older cedar is both darker in colour and a little stiffer while still remaining nice and light for the Flamenco.
seeaxe wrote:
Fri Jan 17, 2020 7:29 pm
Mmmmmm. And did you make all that purfling around the sides???
Well, I inlaid it, does that count? The strips were bought at the last Timber & Working with Wood Show in Sydney. They are very thin and fragile so they were challenging to use, they were also not long enough so I had to join them in several places.

Re: new Flamenco

Posted: Mon Jan 20, 2020 1:49 pm
by lamanoditrento
Beautiful, Martin! :cl