How to drive a pile, ...:)

Anything that doesn't have to do with luthiery can be discussed here. Please be moderate.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

How to drive a pile, ...:)

Post by woodrat » Mon Feb 16, 2015 11:42 am

.....well here is something quite interesting....if you dont have a modern hydraulic gadget to do it for you....just call your mates and have a dance...

[youtube]https://www.youtube-nocookie.com/embed/ ... Kypg?rel=0[/youtube]


WR
"It's never too late to be what you might have been " - George Eliot

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: How to drive a pile, ...:)

Post by woodrat » Wed Feb 18, 2015 12:11 pm

https://www.youtube.com/watch?v=FB2uHnztADU

This link might be better....
"It's never too late to be what you might have been " - George Eliot

User avatar
Nick
Blackwood
Posts: 3641
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: How to drive a pile, ...:)

Post by Nick » Thu Feb 19, 2015 6:15 am

Another little tip,
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
kiwigeo
Admin
Posts: 10582
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: How to drive a pile, ...:)

Post by kiwigeo » Thu Feb 19, 2015 8:22 am

Cool....you can vary rate of penetration by varying the number of fat guys on the crew. You can also vary the number of guys on each side you want to a bit of directional drilling....
Martin

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: How to drive a pile, ...:)

Post by Allen » Thu Feb 19, 2015 2:28 pm

Looking for a new workout routine while out on the rig Martin?
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
kiwigeo
Admin
Posts: 10582
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: How to drive a pile, ...:)

Post by kiwigeo » Fri Feb 20, 2015 9:36 am

Allen wrote:Looking for a new workout routine while out on the rig Martin?
I just came off a well where those guys would have made us a laughing stock......bit specialist (= salesman) told us his super duper $100,000 PDC bit would cut through the rock like butter. We ended up making 5m/hr and ended up pulling the bit (it was shagged).
Martin

User avatar
woodrat
Blackwood
Posts: 1155
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: How to drive a pile, ...:)

Post by woodrat » Sat Feb 21, 2015 10:29 pm

[quote="Nick"]Another little tip,
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/[/quote


Thanks for the tip Nick!....:)
"It's never too late to be what you might have been " - George Eliot

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests