Dressing Fret Ends

Got a new way of doing something? Or maybe an old method that needs some clarification.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Bob Connor
Admin
Posts: 3132
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Dressing Fret Ends

Post by Bob Connor » Sun Sep 30, 2007 11:00 am

Craig asked my how I did the frets on our last guitar so here it is.

I've always found it difficult if not impossible to get the fret ends dressed consistently when they are attached to the fingerboard.

So for this last guitar I bought a fret vice from Luthiers Cool Tools and dressed them all before installing.

The vice cost $15 but you could easily make one in about 15 minutes.

Image


Firstly measure and cut all of the frets and nip out the tangs the required distance.

Turn the fret vice upside down so that the tang is facing up.

Round the end of the fret with a wide file.

Turn the fret back over and round the top of the fret ends to your desired shape.

Polish with sandpaper starting at 600. I finished them up to 12000 micromesh.

Measure your fret and repeat at the other end.

If you make one too short, set it aside and use it on a narrower part of the neck.

And it should turn out something like this.

Image

If anyone would like some more detailed pics of the fret vice I'll post them up next week.

Cheers

Bob

User avatar
Serge
Blackwood
Posts: 543
Joined: Thu Sep 27, 2007 10:43 am

Post by Serge » Sun Sep 30, 2007 11:42 am

Neat job Bob, yes i would like to see pics of the vise next week please, seems to work nicely. Thanks!
Jesus, family, friends, guitar and mandolin : D

User avatar
Rod True
Siberian Tiger
Posts: 234
Joined: Thu Sep 27, 2007 10:18 am
Location: Abbotsford, BC Canada

Post by Rod True » Sun Sep 30, 2007 2:09 pm

Those fret ends look great Bob. So you pre-shape each fret in the fret vise, pull them out and install in the fb. Do you install after attaching the neck and leveling the board, that way you shouldn't need to level the frets at all. Is this the procedure?

The other thing I really want to know is how you keep the white in your purfling lines white when sanding?
"I wish one of the voices in your head would tell you to shut the hell up." - Warren De Montegue

User avatar
Rod True
Siberian Tiger
Posts: 234
Joined: Thu Sep 27, 2007 10:18 am
Location: Abbotsford, BC Canada

Post by Rod True » Sun Sep 30, 2007 2:10 pm

Rod True wrote:Those fret ends look great Bob. So you pre-shape each fret in the fret vise, pull them out and install in the fb. Do you install after attaching the neck to the body after finishing is done, than level the board, than install the frets? That way you shouldn't need to level the frets at all. Is this the procedure?

The other thing I really want to know is how you keep the white in your purfling lines white when sanding?
"I wish one of the voices in your head would tell you to shut the hell up." - Warren De Montegue

User avatar
Rod True
Siberian Tiger
Posts: 234
Joined: Thu Sep 27, 2007 10:18 am
Location: Abbotsford, BC Canada

Post by Rod True » Sun Sep 30, 2007 2:12 pm

Hey, I thought I was editing the post not quoting.

Were did my edit button go???

That's it, I'm outa here :lol: :lol:
"I wish one of the voices in your head would tell you to shut the hell up." - Warren De Montegue

User avatar
Bob Connor
Admin
Posts: 3132
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Post by Bob Connor » Sun Sep 30, 2007 2:17 pm

Whoops. That was me Rod.

Edit button has resumed normal operations.

We press the frets in before the fingerboard get glued.

I didn't have too much trouble with sanding the purfling. The finer the grit the cleaner it got.

They have a very light spray of shellac

Cheers

Bob
Last edited by Bob Connor on Sun Sep 30, 2007 10:43 pm, edited 1 time in total.

User avatar
BillyT
Blackwood
Posts: 355
Joined: Thu Sep 27, 2007 7:57 pm
Location: Location Location

Post by BillyT » Sun Sep 30, 2007 3:17 pm

Very, very clean looking! Thanks Bob! I've seen that kind of treatment before and wondered how it was done!

Hesh1956
Blackwood
Posts: 1420
Joined: Thu Sep 27, 2007 9:58 am

Fretting

Post by Hesh1956 » Sun Sep 30, 2007 9:48 pm

Very nice Bob! I really like the clean look that you have achieved here.

User avatar
Kim
Admin
Posts: 4376
Joined: Wed Sep 26, 2007 8:32 pm
Location: South of Perth WA

Post by Kim » Sun Sep 30, 2007 10:37 pm

Me too, seem it would be a lot easier than trying to futz around with them when already fitted to the fretboard.

Thanks Bob, a follow up with detail of the vice would be good value for all and assist anyone doing an archival search down the track.

Cheers

Kim

User avatar
Craig
Admin
Posts: 1090
Joined: Wed Sep 26, 2007 10:08 am
Location: N.S.W. in the bush

Post by Craig » Sun Sep 30, 2007 10:46 pm

Yeah ,they look so nice . I don't think you can get them that tidy looking , doing them on the board . Good job Bob !

User avatar
BillyT
Blackwood
Posts: 355
Joined: Thu Sep 27, 2007 7:57 pm
Location: Location Location

Post by BillyT » Mon Oct 01, 2007 2:35 am

Bob wrote:If anyone would like some more detailed pics of the fret vice I'll post them up next week.
Yeah! That's me!

User avatar
Alain
Myrtle
Posts: 74
Joined: Sat Sep 29, 2007 12:10 am
Location: Curran, Ontario, Canada

Post by Alain » Mon Oct 01, 2007 4:15 am

Bob, that is very cool! I will give that a try for sure. I too am never totally satisfied with the results, plus that 'bullet' shape is out of sight!

Thanks M8!

User avatar
Dave Anderson
Blackwood
Posts: 260
Joined: Sun Sep 30, 2007 2:38 pm
Location: Florida, USA

Post by Dave Anderson » Tue Oct 02, 2007 3:22 pm

Very Impressive Bob! I would like to see more pics of the fret vice and this procedure.
I am going to give this a shot on my next! Thanks.
Dave Anderson
Port Richey,Florida

User avatar
Arnt
Blackwood
Posts: 134
Joined: Tue Oct 02, 2007 4:13 am
Location: Trondheim, Norway

Post by Arnt » Tue Oct 02, 2007 9:05 pm

I like that, very neat. I guess you could also puposely cut the frets a hair short of the fretboard edge, so they won't stick out if the fretboard shrinks with humidity. Up here it is usually not 'if' but 'when', the 'when' being during winter when every room in the house gets heated and humidity drops close to single figures... I have seen this technique described elsewhere, but I haven't gotten around to trying it myself yet. Thanks for the reminder, I'll do it on my next!
Arnt Rian,
Norway

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests