Gidgee

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
peter.coombe
Blackwood
Posts: 726
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Gidgee

Post by peter.coombe » Mon Jul 30, 2018 10:16 pm

Anyone used Gidgee for back and sides? I have just strung up a flat top mandolin with ringed Gidgee back and sides and it is the best sounding flat top mandolin I have made. 1hr after putting the strings on it beat what is now the second best. When I started this mandolin I said I would never use Gidgee again, the back join was a nightmare, a blade would not go near it without tearout. However, have now changed my mind. Looks stunning and the sound is exceptional. I knew it would sound different because the back and sides were so heavy, but this was a surprise. No pictures yet, too new. Pictures later.
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

User avatar
demonx
Blackwood
Posts: 1395
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Gidgee

Post by demonx » Tue Jul 31, 2018 9:24 pm

I started this Gidgee body on my Xmas break and it’s been put aside since. I should probably get back to it!

Only drama I had with the Gidgee was it chipping when I routed the binding recess. I also had on another guitar a Gidgee fingerboard shrink on me, it’s from a reputable supplier so should’ve been completely dry. I put that guitar aside for several months to see how/if it was going to move and it seems ok.
9B3FE639-63E7-49F9-8DEF-8906A3B2DEAC.jpeg

User avatar
WJ Guitars
Blackwood
Posts: 372
Joined: Thu Jan 26, 2017 4:28 pm
Location: Sutherland NSW
Contact:

Re: Gidgee

Post by WJ Guitars » Wed Aug 01, 2018 10:35 am

When routing for the bindings did you try using tape on the back to minimise chipping (John Hall, 'Blue Creek Guitar' method for difficult wood)? Did you have any issues bending the sides and what was the temperature applied for bending?

I am considering purchasing a Gidgee back and sides set to build a steel string guitar with a soft cutaway. It appears to be a difficult wood to work with and likely to blunt your tools easily. I expect keeping you tools sharp and using sanding methods are the way to work with Gidgee.

Regards
Wayne

User avatar
demonx
Blackwood
Posts: 1395
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Gidgee

Post by demonx » Wed Aug 01, 2018 11:15 am

I never use tape like that so that’d be a no.

As far as blunting your bits, that’s a firm yes. It’s an absolute bitch to resaw as well. Blade goes wherever you don’t want it to. You’ll be sawing straight one second and then it’ll just kick off on an angle. Tough heavy stufff.

User avatar
Trevor Gore
Blackwood
Posts: 1605
Joined: Mon Jun 20, 2011 8:11 pm

Re: Gidgee

Post by Trevor Gore » Wed Aug 01, 2018 11:48 am

peter.coombe wrote:
Mon Jul 30, 2018 10:16 pm
Anyone used Gidgee for back and sides?
For guitars, yes, a couple of times. Here's one. The other one looked much the same, but I left out the sap wood. Hard to bend the figured wood without leaving flats in it and very dense at ~1300kg/m^3. The straight grained wood planes fine, but the figured wood is pretty much sanding only. It won't even scrape very well. Very hard to male a live back guitar out of gidgee.

User avatar
56nortondomy
Blackwood
Posts: 672
Joined: Sat Jan 14, 2012 11:56 pm
Location: Melbourne western suburbs

Re: Gidgee

Post by 56nortondomy » Wed Aug 01, 2018 5:21 pm

I've used it on a uke (posting.php?mode=reply&f=1&t=8173 ) with a cutaway, I never really had any issues with it, I also have a guitar set here which i'll be using on a SS when I get a chance.
Wayne

User avatar
56nortondomy
Blackwood
Posts: 672
Joined: Sat Jan 14, 2012 11:56 pm
Location: Melbourne western suburbs

Re: Gidgee

Post by 56nortondomy » Thu Aug 02, 2018 4:26 pm

Try again. viewtopic.php?f=25&t=7327
I think it's working this time.
Wayne

User avatar
peter.coombe
Blackwood
Posts: 726
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Re: Gidgee

Post by peter.coombe » Fri Aug 03, 2018 8:30 pm

Finally some pictures of the mandolin.
Attachments
Side.JPG
Side.JPG (68.95 KiB) Viewed 13066 times
Headstock.JPG
Headstock.JPG (128.13 KiB) Viewed 13066 times
Front_closeup.JPG
Front_closeup.JPG (104.16 KiB) Viewed 13066 times
Front.JPG
Front.JPG (96.55 KiB) Viewed 13066 times
Bracing.JPG
Bracing.JPG (120.3 KiB) Viewed 13066 times
Back_closeup.JPG
Back_closeup.JPG (99.18 KiB) Viewed 13066 times
Back.JPG
Back.JPG (84.9 KiB) Viewed 13066 times
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

Jim
Blackwood
Posts: 120
Joined: Thu Feb 04, 2016 3:48 pm

Re: Gidgee

Post by Jim » Fri Aug 03, 2018 10:18 pm

King Billy Pine top Peter?

User avatar
peter.coombe
Blackwood
Posts: 726
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Re: Gidgee

Post by peter.coombe » Sat Aug 04, 2018 8:27 am

No it is a Red Spruce top.
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

User avatar
Mark McLean
Blackwood
Posts: 1080
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: Gidgee

Post by Mark McLean » Sat Aug 04, 2018 8:46 am

It does look great! And you are really pleased with how it sounds - so an all round winner. We will look with interest at whether you jump into doing another one, given the difficulties.

User avatar
peter.coombe
Blackwood
Posts: 726
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Re: Gidgee

Post by peter.coombe » Sat Aug 04, 2018 9:29 am

Well it sold on Tuesday to the first person apart from me to play it, so I have started work on another one. I have enough Gidgee for 2 more.
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

Gazm
Blackwood
Posts: 132
Joined: Sun Sep 04, 2011 11:25 am

Re: Gidgee

Post by Gazm » Sun Aug 26, 2018 2:13 pm

Better late than never to ask, What did you use for kerfing material on this lil beauty please Peter?

Gaz

User avatar
peter.coombe
Blackwood
Posts: 726
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Re: Gidgee

Post by peter.coombe » Sun Aug 26, 2018 4:43 pm

What did you use for kerfing material on this lil beauty please Peter?
King Billy Pine.
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests